Injected Temperature的意思|示意
注入温度
Injected Temperature的网络常见释义
喷油温度 ... CURRENT STATUS屏幕是控制器的“正常”显示状态。 Airend Discharge Temperature 主机排气温度 Injected Temperature 喷油温度 ...
Injected Temperature相关短语
1、 injected water temperature 注水温度
2、 injected steam temperature 注汽温度
Injected Temperature相关例句
The physic liquor temperature injected in the blood vessel of the patient is about equal to the blood temperature.
使输入患者血管中的药液温度和血液温度基本相同；
The static and dynamic mechanical properties have been studied for PP that have been injected at different melt temperature and mold temperature.
本文研究了在不同的熔体温度和模具温度下，注射成型的聚丙烯塑料试样的静态和动态力学性能；
The resultant cold, gaseous nitrogen is now injected into the engine's cylinder (see diagram) along with a mixture of water and glycol, known as a heat-transfer liquid, that is at room temperature.
由此产生的冷冰的气态氮被注入发动机汽缸（见图）。与此同时，乙二醇与水的混合物也注入其中，这种混合物是一种常温环境下的“传热液体”。
Under the same temperature, Strength of coke increases after the reaction and coke fines decreases as the amount of UPC being injected into coke layer increases.
同一温度条件下，随着焦炭层喷吹UPC量的增加，气化反应后焦炭的强度提高，粉末量减少。
The effect of the combustor temperature, pressure and coefficient of residual oxygen was experimentally investigated when the fuel was injected into the combustor.
对燃料喷入时的燃烧室温度、压力及推进剂余氧系数等工作参数进行了试验研究。
The impact of injected steam temperature on compressor pressure ratio is relative…
低工况时，水蒸气的注入使涡轮的折合流量、膨胀比皆增大；