Press Power Switch的意思|示意

Press the switch to turn off the power.

按电源开关封闭电源。谢谢。

Students will power is sent to the control box, press ON / OFF button switch ON keys, operation indicator light, machine.

将电源送至控制箱内，按下ON/OFF按钮开关的ON键，运转指示灯指示，机。

Press the "power switch" on front panel, can be step-by-step to switching the devices under controlled. Note: in this case, must be disabling the timer.

如果通过定时器来控制本机，请将本机电源开关打在“关”状态，受控设备会准时按顺序开启、关闭。

Plug in the included laptop-like power supply, connect laser and laser driver, activate the key switch and press the "on" button.

插上像笔记本一样的电源，连接激光器和激光器驱动，启动开关并按下“ON”按键。

This is done as follows: switch on the power, insert the plug, and then press the START button.

按照以下步骤进行：接通电源，插上插头，然后按“开始”键。

Operation: Once get power supply, loads and thermal resistors connected, press the power switch of temperature controller, and then it will start temperature control program automatically.

使用：接好电源、负载及热电阻线后，按下温控器电源开关，温控器即可自动投入定温控制运行。