Pump Casing And Impeller的意思|示意

Since the material of atmospheric condenser, barometric discharge pipe, pump casing of follow-up water ring vacuum pump, impeller, and moisture tank was upgraded and anticorrosive p...

对重点腐蚀部位的大气冷凝器、大气腿、后续水环真空泵泵壳、叶轮、水封罐等升级材料、泵壳内涂防腐涂料后，已运行两年，仍然完好。

Compared by the analysis, optimizing the parameter of the impeller and casing tongue, on side of hydraulic design of pump, is the most effective way to reduce the pressure pulsation of pulp-pump.

分析得出：从泵的水利设计方面来优化叶轮和隔舌的参数，是降低纸浆泵压力脉动的最有效方法。

Liquid enters the primary impeller through an inlet of the pump casing, foams mixed in the liquid are crushed and separated out under the action of the impeller.

液体通过泵壳体进口进入主叶轮，在叶片的作用下把混合在液里中的泡沫打碎并分离出来。

The main parts of pump are pump casing, pump cover, impeller, shaft, sealing ring, shaft sleeve, bearing and shaft seal etc.

泵主要由泵体、泵盖、叶轮、轴、密封环、轴套、轴承、轴封等零件组成。

The pump casing, impeller, motor housing and stationary base elbow shall be manufactured of close-grained cast iron, ASTM A48, Class 30.

泵壳，叶轮，电机壳和固定底座弯头都应该采用符合美国材料试验协会ASTM A48级别30致密铸铁制造。

The main parts of pump are pump casing, pump cover, impeller, shaft, shaft sleeve and supporting parts.

主要由泵体、泵盖、叶轮、轴、轴套和支承部分构成。