SEAT VAlVE SPRING的意思|示意

Because the water pressure in spring assembly and valve body makes the conical compression core and seat seal automatically, the flow channel of valve is closed.

因弹簧总成和阀体中水流压力将锥形压芯和锥形压座自动压合密封，阀体水流通道关闭。

This means that the operating mechanism must be able to move sufficiently far enough away from the valve to allow the valves to be fully closed against its seat by the valve spring.

这意味着操作机构必须离阀门足够远以允许阀门通过气门弹簧使其完全关闭。

The water path switching mechanism of the valve is composed of a push rod, a spring, a spring seat, a valve plug, etc.

阀的水路转换机构由推杆、弹簧、弹簧座、阀门塞等组成。

A spring on the valve stem tends to hold the valve on its seat (closed). The lower end of the spring rests against the cylinder head.

气门杆上的弹簧使气门保持在气门座上(关闭状态)。弹簧的下端抵在气缸盖上。

After the CAM lobe moves out from under the valve lifter, the valve spring forces the valve up onto its seat again.

当凸轮的凸角在凸轮挺杆下出现时，它推动凸轮挺杆向上运动(离开凸轮轴)。

Mainly by the pilot valve seat, valve, diaphragm, spring, adjusting springs and other parts.

导阀主要由阀座、阀瓣、膜片、弹簧、调节弹簧等零件组成。