brazing filler metal的意思|示意

Results show that the brazed joint with good quality can be got by using the reasonable brazing filler metal and proper brazing flux (HL401 + QJ201) and the optimum brazing technological parameters.

研究表明，采用合理的钎料和钎剂组合(HL401 + QJ 201)以及正确的钎焊工艺参数可获得质量良好的钎焊接头。

Choosing a appropriate thickness filler metal for brazing metal-ceramic can decrease the residual stresses in the brazed joints and improve the joint strength.

同时，选择合适厚度的钎料会降低钎焊接头的残余应力，改善接头连接强度。

Main technology parameters of effects on brazing stainless steel joints using nickel base filler metal have been studied.

本文研究了影响镍基钎料钎焊不锈钢接头性能的主要工艺参数。

This kind of brazing filler metal had a good filling performance, at the same time, sound high-temperature strength and impact toughness can be obtained in the joint.

该钎料不仅具有较好的填缝能力，同时获得的钎缝接头具有良好的高温强度和抗冲击性能。

Brazing between dissimilar metals, choosing brazing filler metal and flux which is matched with brazing filler metal and the base metal is very important.

异种材料间钎焊，不仅需选钎料，而且对与钎料、母材相匹配的钎剂的选用同样也很重要。

The quality problems of home made brazing filler metals as compared with ones used abroad are analyzed on the basis of testing and supervision results of filler metal last few years.

从近几年国内钎料质量检测结果出发，分析了国产硬钎料产品质量方面存在的问题以及与国外同类产品相比所存在的差距。