casting mold core的意思|示意

At the same time both mold making and casting core.

同时还兼有模具和铸芯制做。

If a hollow casting is to be made the pattern will include extension pieces so that Spaces to accept the sand core are molded into the sand. These additional Spaces in the mold are termed core prints.

如果铸造空心铸件时模型上包含伸长杆便于在砂中放置砂芯的空间称为型芯座。

Although space of slider depth in aluminum alloy die casting mold are larger than the minimum values proposed by several handbooks, sometimes they are too small for pulling core.

尽管铝合金压铸模的滑块宽度间隙大于一些手册推荐的最小间隙，抽芯卡滞仍然时有发生。

The casting technique with top gating system, outer shaped iron chill, compound casting mold and core assembly molding was used for producing aluminum impeller on a large scale successfully.

详细介绍了采取顶注式浇注系统、成形外冷铁、复合铸型、组芯造型的铸造工艺，成功地生产出批量铝叶轮。

The effects of superheat on the shell's thickness leaving mold, the surface temperature of casting blank, the shell's thickness in casting solidification and the length of liquid core were simulated.

进行了过热度对出结晶器坯壳厚度、方坯表面温度、铸坯凝固过程中坯壳厚度和液相穴的影响的模拟分析研究。

The positive can be produced either by direct modeling in wax over a prepared core (direct lost-wax casting), or by casting in a piece mold or flexible mold taken from a master cast.

正像可以用蜡直接在一个准备好的核心上浇铸成型(直接脱蜡浇铸)，也可以浇在一个模具中，或者从主铸件上取下来的柔韧的模具中。