forming limit diagram的意思|示意
成形极限图
forming limit diagram的网络常见释义
成形极限图 ... texture; formability; forming limit diagram [gap=22626]关键词：镁合金板材；单向多道次弯曲；织构；成形性能；成形极限图 ...
的成形极限图 ...分别为单向拉伸、平面应变和等双拉应变的二重线性复合变形路径作用下且应变主轴发生转动时的成形极限图（Forming limit diagram，FLD），然后通过一定的试验来验证和讨论这些计算结果。
成形极限实验 ...观组织特征;在此基础之上,提出了考虑温度效应的镁合金板材温热成形韧性破裂准则,开展了成形极限实验(FLD,Forming Limit Diagrams),获得了不同温度下的成形极限曲线(FLC,Forming Limit Curves),通过数值模拟和...
并与传统成形极限图 机械工程学报 LS-DYNA软件对三通管液压胀形过程进行模拟，应用FLSD预测胀形过程中破裂的发生及成形压力极限，并与传统成形极限图(Forming limit diagram, FLD)结果进行了对比。研究表明，FLD与FLSD预测结果中破裂缺陷位置相同，但极限内压力值存在很大差别，而
forming limit diagram相关短语
1、 Forming limit diagram-FLD 成形极限图
2、 forming limit diagram fld 成形极限图
3、 stress forming limit diagram 应力成形极限图
forming limit diagram相关例句
The improving processes are proposed based on the Forming Limit Diagram (FLD) analysis.
针对这种情况，从成形极限图（FLD）上讨论了可能的工艺改进方案。
In view of this situation, the improving processes are proposed based on the Theoretical Forming Limit Diagram analysis.
针对这种情况，从理论成形极限图上讨论了可能的工艺改进方案。
By analyzing the real stress - strain curve with theory of plastic instability and using this testing method, another form of the forming limit diagram has been found.
在利用共稳理论对实际应力应变曲线进行分析的同时，得出了求作板材成形极限图的新方法。
Forming limit diagram is used for analyzing sheet forming in finite element analysis software have proposed forming limit stress diagram which is not relies on the loading path.
但它是依赖于加载路径的，用它来分析多道次板成形是不合适的，于是人们提出了与加载路径无关的应力成形极限图。
Deformation mode is adjusted according to forming limit diagram (FLD) and maximum springback error, so the optimized one can be found, which in turn optimizes the stretch bending trajectory.
根据成形极限图和规定最大回弹超差量来调整变形模式，找到优化的变形模式和拉弯轨迹。
Some foreign scholars developed the concept of Forming Limit Stress Diagram (FLSD) on the basis of FLD. FLSD is considered as strain path independent.
一些国外学者在板料成形极限图的基础上提出了板料应力成形极限图(FLSD)的概念，并认为板料应力成形极限图具有与路径无关的特点。