fracture surface morphology的意思|示意

美 / / 英 / /

断口形貌


fracture surface morphology的网络常见释义

断口形貌 ...相对密度;断口形貌[gap=1524]Key words: Mo-Ti-Zr alloy rods; rotary forging; relative density; fracture surface morphology...

fracture surface morphology相关短语

1、 impact fracture surface morphology 冲击断面形态

2、 tensile fracture surface morphology 拉伸断面形貌

3、 morphology of fracture surface 断裂面形貌

fracture surface morphology相关例句

It shows good matrix-carbon fiber adhesion between the treated CF with fracture surface morphology and PA6. the mechanical property of composite is enhanced compared with pure PA6.

复合材料断面照片显示处理后的碳纤维和基体尼龙6材料有着很好的界面结合。

The impact fracture surface morphology observed by SEM showed that the toughening mechanism of the blend was in accordance with that of the shear yielding.

共混体冲击断面形貌的SEM分析表明其增韧机理为剪切屈服机理。

Finally, microscopic holes are formed near the fracture surface, the morphology of which is changed with the increase of volume fraction of martensite.

微孔的形态随着马氏体的比率而变化,随着马氏体体积分数的升高,微孔形态从界面结合力的丧失转为微裂纹。

The studies were carried out of the test of fatigue crack growth rate and relative to the microscopic morphology of fracture surface in certain high-strength steels.

本文用宏观和微观方法测量了几种高强度钢的疲劳裂纹扩展速率,用金相和断口复型法观察了疲劳断口的微观形态以及与显微组织的关系。

SEM analysis indicated that there was remarkable toughness fracture surface morphology for the epoxy resin system modified with ESBSVP.

SEM结果表明,经ESBSVP改性的环氧树脂体系断面呈现出明显的韧性断裂特征。

The impact fracture surface showed a tough morphology for POM/NBR/Novolak blends and brittle one for POM/NBR blends.

断裂形貌考察表明,POM/ NBR共混物的断裂面呈脆性断裂特征;