height-thickness ratio的意思|示意
height-thickness比率
height-thickness ratio的网络常见释义
高厚比 ... b 235 40 ≤ 6.6 压 弯 构 件 的 局 部 稳 定 二、压弯构件中板件的宽厚比(高厚比)限值 2、腹板高厚比(Height-Thickness Ratio) 工字形截面 工字形截面腹板是在不均匀压力和剪力共同作用 下发生的。
height-thickness ratio相关短语
1、 height to thickness ratio 高厚比
2、 height-to-thickness ratio 高厚比
3、 thickness-height ratio 厚高比
height-thickness ratio相关例句
The fundamental problems of ZA27 alloy squeeze casting with high ratio of height to thickness were studied in this paper.
本文主要研究了大高径比ZA27合金铸件挤压铸造过程的若干基本问题。
The influence of web plate height to thickness ratio, hole ratio and the width of a single web plate on the buckling capacity of LHFB was analyzed.
分析了腹板高厚比、孔洞率以及单块腹板宽度对LHFB屈曲承载力的影响。
When the relative gap height (the ratio of flap height to gap width) is in the range of 0 8-2 0, the mean pressure will reduced 30% if the flap height is smaller than the thickness of boundary layer.
底部相对间隙在0 8～ 2 0之间时，扰流片高度小于边界层厚度时的壁面平均压力比扰流片高度大于边界层厚度时小30 %左右。
The major parameters including the curvature radius, the ratio of height to span, the ratio of height to width, the thickness of web, the stiffener density and the diaphragm density are studied.
主要研究了曲率半径、宽跨比、高宽比、腹板厚度、加劲肋数量、横隔板间距等结构参数对曲线钢箱梁承载力和变形特性的影响。
As the ratio of thickness to height of cross-section increases, the failure range decreases and the failure mode has the tendency of shearing failure.
随着衬砌厚跨比的增大，混凝土衬砌的破坏范围逐步减小，衬砌更倾向于剪切破坏。
The ratio of rim thickness to tooth height was defined for representing the flexibility of internal ring gear.
以轮缘厚度系数来描述内齿圈的柔性，以均布的弹簧约束来反映内齿圈与机体的配合情况。