loading plate test的意思|示意

According to the centrifugal test results, the corrected formulas of scale effect and plate size were introduced and the results of plate loading tests were modified.

基于离心模型试验结果，提出基础尺寸效应修正式和承压板尺寸换算式，对平板载荷试验结果进行修正。

Based on the deformation modulus from the in-situ plate loading test, the settlement of each point on the raft foundation was calculated using spring model with concentrating force.

根据原位压板试验确定的强度和变形参数计算筏板基础下地基的承载力，并采用集中力弹簧模型计算筏板各点的沉降。

The costly plate loading test is usually used to obtain the load-settlement curve of the pile.

工程上通常是通过静载荷试验来测取桩的荷载-沉降曲线，耗资巨大。

It introduces the principle, equipment and method of deep plate loading test by self-balance method, and compares it with the traditional loading test of single pile.

介绍自平衡法深层平板载荷试验原理、试验设备及试验方法，并将其与传统单桩静荷载试验进行效益对比分析。

When plate loading test is carried out, the deformation properties of surface layer will be different from that of inner layer because of the existence of disturbance.

现场岩体变形试验时，试验点部位岩体由于受卸荷、松弛影响，表层岩体变形性能与深部未扰动岩体变形性能存在差异。

The synthesized reload modulus was confirmed by resilience test, plate loading test, and large scale bearing test. The replacement foundation modulus was ensured by the method of equivalent-stiffness.

分别采用室内回弹试验、野外平板载荷试验和堆载试验，综合确定土体的再压缩模量；