locking head screws的意思|示意
锁头螺钉
locking head screws的网络常见释义
型锁定螺丝钉 ...膝关节端有密集的螺钉固定孔（5～7 个孔），而且旋入的螺钉在不同方向，LISS 骨端区域的自攻型锁定螺丝钉（locking head screws，LHS）的位置与角度均经过精确的设计，其固定的稳定性由自锁型螺钉与钢板锁定后 的成角稳定性来维持，固定可靠。
锁定螺丝钉 ...膝关节端有密集的螺钉固定孔（5～7 个孔），而且旋入的螺钉在不同方向，LISS 骨端区域的自攻型锁定螺丝钉（locking head screws，LHS）的位置与角度均经过精确的设计，其固定的稳定性由自锁型螺钉与钢板锁定后 的成角稳定性来维持，固定可靠。
自钻型锁定螺丝钉 LISS骨端区域的自攻或自钻型锁定螺丝钉（Locking head screws,LHS）的位置与角度均经过精确的设计。
locking head screws相关例句
Locking head screws have some peculiar differences from conventional screws.
锁定头的螺钉与传统螺钉有特别不同之处。
Locking head screws will not have optimal fixation if the plate is not sitting over the middle of the bone surface.
如果钢板没有放在骨界面的中央，锁定头螺钉将不能达到最佳的固定。
In cases where both - conventional screw and locking head screws are applied - it is necessary to apply the LHS after the conventional screw.
当普通螺钉和锁定螺钉同时应用是，应先使用普通螺钉。
Includes Low Head, Button Head, and Flat Head Screws, as well as special Socket Cap Screws such as Vented, Drilled Head, Self-Locking, and more.
包括低压头，半圆头及平头螺丝以及特殊内六角圆柱头螺钉如排空，钻孔头，自锁，等等。
It can be adjusted by the adjusting screw caps located on the head covers of both sides. Loose the locking screws beforehand, then re-tighten them after.
可通过两侧端盖上的调整螺盖来进行，调整前应松开紧定螺钉，调整后拧紧。