low carbon martensite steel的意思|示意

Observations showed that the micro-structure of the steel after forging or high temperature rolling was composed of low-carbon martensite, a little part of bainite and residual austenite.

微观组织观察表明，在锻造或高温轧制状态下获得了以低碳马氏体为主，含少量贝氏体和残余奥氏体的复合组织。

After the carbon content reached 2.3%, the matrix is martensite primarily and the impact wear resistance performance enhanced largely compared with the low-carbon high vanadium high-speed steel.

含碳量达到2.3%后，基体以马氏体为主，耐磨性比低碳的高钒高速钢大幅提高。

The effect of hardening and tempering process on the organization and performance of high-strength and high-toughness non-hardened-and tempered steel of low carbon martensite is researched.

研究了淬火、回火工艺对低碳马氏体型高强度高韧性非调质钢的组织和性能的影响。

The results show that as-annealed microstructure and as-quenched-tempered microstructure of the low carbon high alloy steel added nickel are both single-phase lath martensite.

结果表明：加镍低碳高合金钢无论退火态还是淬火回火态，其组织均为单相板条马氏体；

The effect of silicon and isothermal quenching process on the microstructure and mechanical property of the high-carbon low alloy martensite-Bainite steel was studied.

研究了硅和等温淬火工艺对高碳低合金马氏体-贝氏体钢金相组织与机械性能的影响。

The influence of carbon on microstructure and mechanical property of low-carbon martensite steel was studied by fixing the content of other elements and regulating the content of carbon.

通过固定其它元素的含量，调整碳含量的方式，研究了碳含量对马氏体钢显微组织和力学性能的影响。