low pressure molding的意思|示意

美 / / 英 / /

低压成型


low pressure molding的网络常见释义

低压模塑 ... low pressure gauge低压计 low pressure molding低压模塑 low pressure resin低压尸 ...

低压模 ... 粗压模 blocking die 低压模 low pressure molding 滚压模 roller die ...

low pressure molding相关短语

1、 semiautomatic low pressure molding machine 半自动低压成型机

2、 low pressure transfer molding 低压塑成型

3、 low pressure injection molding 低圧注塑

low pressure molding相关例句

The injection molding test has been carried out - the test shows that the injection pressure is low, the forming cycle is short and the production efficiency is high.

试验表明热流道注射成型注射压力低、成型周期短、生产效率高。

This through injection molding machine with low noise, pressure stability, low power, high efficiency advantages.

今通注塑机具有低噪音、压力稳定、省电、高效率的优点。

Liquid injection molding utilizes low viscosity silicones which can be pumped at lower pressure and temperature, and cure in significantly less time and with less waste than solid materials.

液体侵渍模塑使用低粘度的硅树脂,在低压和低温条件下抽运,在极短的时间内固化,与固体材料相比,废弃物少。

The sheet molding compound had an appropriate low viscosity to be molded at low pressure.

片材在模腔内有较低的粘度,适宜于低压成型。

This whole needle valve type hot runner injection under low pressure, the injection molding products in contraction deformation is smaller.

针阀整体式热流道在低压下注射使注塑品在收缩时变形更小。

This whole needle valve type hot runner injection under low pressure, the injection molding products in contraction deformation is smaller.

针阀整体式热流道材料浪费少,注塑产品的质量得到改善并更加稳定。