thermally induced phase separation的意思|示意
热致相分离，热诱导相分离
thermally induced phase separation的网络常见释义
热致相分离 ...中心 > 相关论文 > 热致相分离法制备聚（乙烯—乙烯醇）微孔膜的研究 热致相分离(Thermally Induced Phase Separation,TIPS)是一种简单新颖的制膜方法,在高温下把聚合物溶于高沸点、低挥发性的稀释剂,形成均—溶液,然后降温冷却,...
热致相分离法 ...称：热致相分离法制备亲水性乙烯—丙烯酸共聚物微孔膜的结构控制 前言： 热致相分离法(thermally induced phase separation，TIPS)是一种简单新颖的制膜方法，它是将热塑性、结晶性的高聚物与某些高沸点的小分子化合物(也称稀释剂)在较高...
用热致相分离 ...烯微孔膜的影响 简介： 以邻苯二甲酸二丁酯(DBP)和大豆油混合物为稀释剂,利用热致相分离( Thermally Induced Phase Separation ,TIPS)法制备了等规聚丙烯(iPP)微孔膜.结果表明,稀.
热相制法 热相制法（Thermally induced phase separation，TIPS）是一种重要的多孔聚合物膜制备技术，是目前最先进的多孔膜制备方法。
thermally induced phase separation相关短语
1、 complex Thermally Induced Phase Separation 的复合热致相分离
thermally induced phase separation相关例句
The effect of diluent(mineral oil)viscosity on the micropore structure of HDPE microporous film via thermally-induced phase separation was studied with SEM.
采用扫描电镜（SEM）研究了稀释剂（矿物油）粘度对热诱导相分离高密度聚乙烯（HDPE）微孔膜微孔结构的影响。
The traditional manufacturing methods include powder-sintering, melt-spinning and cold-stretching, thermally induced phase separation, state track etching, non-solvent induced phase separation, etc.
微孔材料的传统制造方法有粉末烧结法、熔融拉伸法、径迹蚀刻法、非溶剂致相分离法等。
Microporous polypropylene hollow fibrous membranes may be prepared by the melt spinning and cold stretching (MSCS) or thermally induced phase separation (TIPS) method.
对熔融纺丝-冷却拉伸与热致相分离两种制备微孔聚丙烯中空纤维膜的意义、原理、过程、影响因素等进行了评述。
Material phase change and thermally induced phase separation of materials are controlled by controlling the spray head and working chamber temperatures.
通过对喷头温度和成形室温度的控制，实现了对材料的相变和热致相分离过程的控制。
Thermally induced phase separation (TIPS) procedure is a simple and versatile membrane preparation technique.
热诱导相分离法（ TIPS）是一种简单而有效的制备聚合物微孔膜的方法。
The polyvinylidene fluoride (PVDF) flat microporous membrane was prepared via thermally induced phase separation (TIPS) method using dimethyl phthalate (DMP) as the diluent.
以邻苯二甲酸二甲酯（DMP）为稀释剂，采用热致相分离法（TIPS）制备了聚偏氟乙烯（PVDF）平板微孔膜。