tool radius compensation的意思|示意
刀具半径补偿
tool radius compensation的网络常见释义
刀具半径补偿 刀具半径补偿过程中的过切现象及解决对策-科技类论文-职称学术论文网 关键词：数控机床；刀具半径补偿；过切现象 [gap=479]Keywords: numerical control machine; tool radius compensation; over-cutting;
和刀具半径补偿 ...最大的机床门户网站 Center Point Control)、刀具方向补偿(Tool Posture Control)和刀具半径补偿(TRC，Tool Radius Compensation)。
刀尖圆弧半径补偿 Tool radius compensation 刀具半径补偿; 半径补偿; 刀尖圆弧半径补偿 收藏 compensation for tool’s radius 三维刀具半径补偿 收藏 .
tool radius compensation相关短语
1、 cutting tool radius compensation 刀具半径补偿
2、 tool radius compensation or offset 刀具半径补偿
3、 NC car tool radius compensation 数控车的刀具半径补偿
tool radius compensation相关例句
This article introduces tool radius compensation in CNC milling process, and analyzes over-cutting reasons in using tool radius compensation.
介绍了数控铣床加工中的刀具半径补偿，分析了使用刀具半径补偿产生过切削现象的原因。
We present two kinds of tool radius compensation algorithm in-depth study, base on the basis of the design at home and abroad CNC system.
本文在借鉴国内外数控系统设计的基础上，对现有的两种刀具半径补偿算法进行了深入的研究。
In addition, according to various states of the establishment, proceeding and cancel of the cutting tool nose radius compensation, the data are stored in different way.
此外，按照刀补建立、进行及撤消等不同的状态采用不同的方法进行数据的存储，从而提高程序的可扩充性及可替换性。
A detailed study has been done to the implementation of each function, and the study and application of the tool radius and thickness compensation is the core of the system.
对每一功能的实现方法都做了详细研究，刀具半径补偿与刀具厚度补偿功能的实现与应用是本系统的核心。
When numerical control of machine tool is operated, if the cutter radius compensation is applied inappropriately, the phenomenon of over-cutting will appear.
数控机床在使用刀具半径补偿时，如果使用不当，将会出现过切现象。
Practice has proven tool radius compensation in the rough, finishing in the semi-fine and practical, and the size of precision machining parts, components can also be completed on the burr removal.
实践证明刀具半径补偿在粗、半精和精加工中切实可行，且符合零件加工尺寸精度要求，同时还可以完成零件上毛刺的清除。