wheel slip control的意思|示意

The anti-lock brake principle, regulating braking pressure output properties in accordance with condition of road surface so as to control the wheel slip ratio in idea scope, is put forward.

提出了针对路面条件通过控制器调节制动压力输出特性使车轮滑移率处于理想的范围，以实现防抱死制动的原理。

It can occur with tyre injudicial controlling, if the ABS system controls tyre drift-out, Anti-slip Regulation control driving wheel sliding and engine controlling retarding to torque.

在ABS系统控制轮胎的滑移时，或驱动力控制系统控制驱动轮的滑转时，或发动机制动力矩控制时，都会因轮胎磨损出现控制不当的情况。

The driving model of the Electrical Vehicle is to separately control wheels by fuzzy PID controlling arithmetic. This arithmetic makes slip-rate of every wheel reaching the best rate.

对所建立的简化电动汽车驱动模型，采用模糊PID控制算法对左右两侧驱动轮单独控制，应用此算法可使各车轮的滑转率控制在最佳滑转率附近。

Finally choose reduce wheel speed, acceleration and slip ratio control parameters of logic threshold for control methods, as the paper design of the ABS controller control methods.

最后选择以车轮减速度、加速度及滑移率为控制参数的逻辑门限预测控制方法作为本论文设计abs控制器的控制方法。

For the slip of the wheel, model following controller was designed and the anti-slip control strategy based on the model following was confirmed.

对于车轮的滑移，设计了模型跟踪控制器，制定了基于模型跟踪的防滑控制策略。

A desirable vehicle model with the best performance of side slip Angle and yaw rate is established through connecting direct yaw moment control (DYC) with four wheel steering (4ws) system.

将横摆力矩控制(dyc)与四轮转向(4ws)系统相结合，建立侧偏角和横摆角速度具有最佳输出响应的车辆理想模型。