workpiece diameter的意思|示意

美 / / 英 / /

工件直径


workpiece diameter的网络常见释义

工件直径 ... workpiece n. 工件,轧件,分部工程 workpiece diameter n. 工件直径,轧件直径 workpiece motions n. 工件运动,轧件运动 ...

轧件直径 ... speed range n. 螺旋角,捻角 workpiece diameter n. 工件直径,轧件直径 thread n. 螺纹,车螺纹,线,线索,细丝,纤维 vt. 车螺纹,拧螺钉,穿线,上螺母,穿过 ...

workpiece diameter相关短语

1、 Processing Workpiece Diameter 加工工件直径

2、 workpiece diameter measure 轴径测量

3、 Max Processing Workpiece Diameter 最大加工工件直径

workpiece diameter相关例句

The roll lapping machine is one of the equipments processing the excircle surface of minor diameter workpiece by lapping. The working accuracy is affected directly by the guide wheel of this machine.

滚研机是小直径工件外圆表面研磨加工设备之一,该机导轮表面形状直接影响加工精度。

The thesis aims to the special areas which require non-contact and online measuring the diameter of workpiece.

本文针对需要对工件直径进行非接触在线检测的特定领域。

Analysis shows that the absolute values of difference workpiece diameter will increase with the increases of tool setting error.

分析表明:零件直径方向的尺寸差值的绝对值随着对刀高度误差的增大而增大;

As for small diameter workpiece, martensite distribution can be obtained by immediately quenching.

对于直径较细的工件,轧后立即淬火几乎可得到全部马氏体。

Free operation is realized, thus effectively solving a problem of the bore that the diameter is big and a difficulty of a large workpiece that the work range is large.

实现了操作自由,有效解决大直径的钻孔问题并解决了大型工件加工范围大的困难。

Simulation results show strain distribution of workpiece and how outer diameter, thickness, axial elongation of some typical nodes change with time.

分析了毛坯的应变场分布,典型节点外径、壁厚、轴向伸长量随时间的变化曲线,对整个成形工艺及变形机制有较好的动态认识。