yield strength of steel的意思|示意

美 / / 英 / /

钢的屈服强度


yield strength of steel的网络常见释义

钢材降伏强度 ... yield strength of steel 钢材降伏强度 high yield strength 高屈服点 high-yield strength 高屈服强度 ...

yield strength of steel相关例句

Increasing the yield limit of high strength steel, and increasing the depth of submergence, the form of the differential equation's result will not only be limited with the complex number.

由于高强度钢材的屈服极限不断地增大,下潜深度的不断增加,弯曲微分方程解的形式将不仅限于复数解。

The yield strength of vanadium bearing steel improves at lower temperature because of low phase transformation starting temperature.

含钒钢因相变开始温度低,其屈服应力快速增加的温度较低。

For reinforced concrete structure construction with seismic fortification, the yield-strength ratio of steel bar is a very important material quality index.

对于有抗震设防的钢筋混凝土框架结构施工,钢筋屈强比值是个十分重要的材料质量指标。

Pipeline steel adopting the spicular ferrite owns the better properties of forming and anti corrosion for its low ratio of yield strength and tensile strength and uniform microstructure.

由于低屈强比和组织均匀,管线钢采用针状铁素体组织可以具有较好的(管)成型性及耐腐蚀性。 用针状铁素体管线钢平板或卷板制造的焊管的力学性能彼此相差不大。

The results show that the steel has high strength, low yield ratio, powerful fire-resistant and good welding performance, so it can completely satisfy the request of JIS3136 standard of Japan.

结果表明,该钢种具有强度高,屈强比低,耐火性能强及焊接性能优良等特点,完全能够达到日本JIS3136标准要求。

The yield and tensile strength of the welded joints of the two kinds of materials increase under dynamic loading and prestrain condition that have little effect on the plasticity of structural steel.

两种材料焊接接头在动载和预应变下的屈服强度和抗拉强度均有所提高,但对其塑性影响均不大。