Cross-distortion的意思|示意

Cutting roll-formed steel C-section to stub columns will produce different extent of cross section distortion along the lengths and cause additional initial geometric imperfections.

把辊轧成型的C形冷弯薄壁型钢构件切割成若干短柱，在短柱中将产生不同程度的歪曲变形，进而引起附加的初始几何缺陷。

The cross-section distortion of bent tube is very small by using ball filler push bending process, with the ovality less than 1.5%.

运用珠粒填料推弯成形工艺成形出的管材截面畸变程度很小，椭圆度不超过1.5%。

The results show that the severe cross section distortion takes place much easier in the thin-walled rectangular tubes than that in the circular tubes and plank stuff.

结果表明，与圆管、板材等型材的压弯相比，薄壁矩形断面管压弯更容易产生严重的截面畸变；

With the way to solve the distortion effect problem by the flexible foundation method, the distortion stress was calculated after solving the cross-section distortion Angle.

分析畸变效应时采用了弹性地基梁法的求解思路，在求出截面畸变角后，计算畸变应力。

According to the deformation of single cell box girder cross-section, the displacement parameters were designed, and the displacement modes of cross-section distortion angles were deduced.

根据单箱单室箱梁截面的变形，设计位移参数，导出横截面横向、竖向畸变角的变位模式。

This article introduces the reason why there's existing the distortions of the micro align models and explains what is cross distortion and scan distortion 340 and how to match the different "340".

叙述了340光刻机发生畸变的原因，并解释了什么是交叉畸变，什么是扫描畸变，并对如何进行两台340光刻机的匹配进行了探讨。最后给出了试验数据。