distortion cross的意思|示意

The cross-section distortion of bent tube is very small by using ball filler push bending process, with the ovality less than 1.5%.

运用珠粒填料推弯成形工艺成形出的管材截面畸变程度很小，椭圆度不超过1.5%。

According to the deformation of single cell box girder cross-section, the displacement parameters were designed, and the displacement modes of cross-section distortion angles were deduced.

根据单箱单室箱梁截面的变形，设计位移参数，导出横截面横向、竖向畸变角的变位模式。

As you can see, there is no more cross-over distortion, even at 100ma idle current.

你可以看到，有没有更多的跨超过失真，甚至在一百毫安闲置电流。

With the way to solve the distortion effect problem by the flexible foundation method, the distortion stress was calculated after solving the cross-section distortion Angle.

分析畸变效应时采用了弹性地基梁法的求解思路，在求出截面畸变角后，计算畸变应力。

And the shot peening surface micro morphology is acute deformation of surface microstructure, lattice distortion and bidirectional cross-slip;

喷丸表面微观形貌为表层组织剧烈变形、晶格扭曲和双向交滑移；

Cutting roll-formed steel C-section to stub columns will produce different extent of cross section distortion along the lengths and cause additional initial geometric imperfections.

把辊轧成型的C形冷弯薄壁型钢构件切割成若干短柱，在短柱中将产生不同程度的歪曲变形，进而引起附加的初始几何缺陷。